Lost Ollie train yard scene

With the new Netflix series Lost Ollie now out, I can finally share some BTS stuff I worked on as a camera operator. This has been a long wait as it's a very VFX heavy show, which takes a long time in post. As a native 4K pipeline, we used the Alexa Mini LF in open gate mode with Arri Signature Primes.

On this project, we shot several parts of the train yard scene, which takes place in episode 2, with the animated characters as they try to catch a ride on a train. We would shoot a pass with stand-in dolls for lighting reference (as seen in the photo below), and then shoot the scene without them so they could be added in post by Industrial Light and Magic.

With the characters only being about a foot tall, we sometimes had to get creative to get the camera low enough to be on their eye line, such as by digging a hole so the camera could get just a few inches lower.

From down in a hole, to up on the roof of our production cube, we got a lot of coverage.

We even put the camera on a truck that drives on the tracks to shoot a shot from "inside the train car" as the characters try to catch it. You'd think it would be pretty smooth, as rails look nice and level. It definitely was not!

We also did a bunch of train drive-by shots as well as dollying shots next to moving trains, where the CGI characters will be inserted running as they try to hop on the train.

This one was a lot of fun to operate, though it was an interesting challenge framing for character movement that we couldn't actually see and only had to imagine was happening. I also enjoyed helping to find shots for characters that were only a foot tall, as it's a little more unique perspective than I'm used to.

Westworld season 4

I can't believe it was just over a year ago that we were out shooting plates for Westworld. For the new season, they knew they would have scenes on a train and that the train car would be a standing set. Rather than shoot green screen and composite in later, they had us shoot the train plates ahead of time so they could do LED walls for interactive lighting.

Seeing as how they would be train height and potentially see out of multiple windows on any given side of the train car, we shot with 3 RED Komodos on Ronins (for smoothness) with 14mm Sigma Art primes, which would cover a 180° field of view with enough overlap to stitch the cameras together. These were all built on a truck at train window height with the run/stop synchronized via a Tilta Nucleus. By setting the Nucleus motor on each camera to the same channel, a single handset could control the iris (which we wanted to match between cameras) and run/stop on all three units.

We shot a few locations for the show, some in the desert, some on the freeway between Glendale and Eagle Rock, and a bit near downtown.

We did discover that the Komodos don't like having their exhaust vent facing upwind, as the incoming air would fight against the fan blowing the opposite direction and create a sort of air-pressure stalemate, causing them to overheat quickly. We solved the issue by taking a small piece of foam board, folding it into a "V", and taping the "tent" over the the exhaust port, effectively keeping the upwind air from pushing against the fan, but letting the hot air vent out the top and bottom of the tents. After that, we had no temperature issues at all.

I haven't seen all of the new season, so haven't found where the downtown footage we shot has been used yet, but we did the desert background plates for these shots:

As well as the arrival of the train to the city, shot on the 134 going up and down the hill between Glendale and Eagle Rock, as seen in these shots:

It was a pretty fun shoot and interesting in that we shot these before the main unit had even started filming the show, whereas I'm used to us shooting either concurrent with the main unit or, for a lot of the network TV shows that shoot their cars on green screen, well after they've shot their episode.

Miracle Workers season 3: Oregon Trail VFX plates

Earlier this year I did some second unit photography for season 3 of Miracle Workers: Oregon Trail. These were VFX plates of river crossing locations, where the VFX team would take the high resolution pan and tile plates and populate these environments with CG characters.

The tool of choice was the usual RED Gemini. I shot each set of tiled plates with a couple different lenses: the Zeiss Super Speed 25mm and the Sigma Art Cine 14mm. In situations with little direct supervision, it's always safer to shoot two options in case one of them doesn't work for the VFX team. Adding that second option, even if it wasn't asked for, on a shoot like this is just a smart move since we had plenty of media and drive space and the plates weren't that data intensive anyway. They don't want to add another day of shooting pickups and I would prefer not to make the 6-hour drive to this location again. In the end, it is a bit time consuming since I'm shooting tiles (about 8-14 tiles for each shot), but I knew my schedule and knew I had the time to give them that secondary coverage and still make my day.

There was also a drone team shooting with us, but the wind was pretty strong and so our unit had to split up, with myself going off and shooting the plates all on my own while the field producer stayed with the drone crew, supervising their work. Fortunately, I had gone over the locations with the field producer beforehand, so I knew what to get and where.

One of the locations had a barrel full of firewood burning just off screen with tons of smoke pouring out, and there were no other places where the land jutted out into the water far enough to get the shot, so it had to the that place. Knowing I couldn't stop the smoke, I quickly moved on, hoping the fire would die down before I returned later in the day. When I came back to shoot the location near the end of the day, it turned out delaying was a positive, as the barrel was no longer smoking, but on top of that the tide had gone down and I was able to get out even further to place my camera, which ended up with a better shot.

After wrapping things up, I headed back and met up with the field producer and drone team as they were finishing up their day, and just in time too. The sun would soon be too low to get the shots we needed. Mission accomplished.

Getting the tripod a little wet is a small price to pay for a better shot.

Hacks HBO Max additional driving plates

I found the other episode we shot driving plates for in episode 7. This was a nighttime shoot, so we used a different LUT and mounted the cameras at a normal height rather than the elevated height for the double decker bus shots. We also had one camera mounted on the front, facing forward and up to capture reflection plates for the windshield. These shots were a little more simple, as they were background plates for a car driving scene.

The road was pretty rough, as construction had just started and they were tearing up the road (as you can see from the traffic cones in my shot of the monitor), but production needed to comp in the background of them driving up to the wedding chapel. Thank goodness for post-stabilization!

Hacks HBO Max series plates

Earlier this year I went up to Las Vegas to shoot some driving plates for a show called Hacks. I had no idea what it was, but knew we had to rig the camera array 13' up in the air to match the second story of a double decker bus. We used a triple RED Gemini array, controlled through a router so we could roll and cut all 3 cameras at exactly the same time.

We did runs on both the Panavision lenses they shot the series on -to exactly match the optical characteristics- as well as 14mm Sigma Art Cine primes to give them larger field of view options. Better to give them both options and not need one than shoot one option and need the other that wasn't shot.

I was pretty surprised when a couple months later I saw ads for a new HBO Max show called Hacks. And dang it, it looked pretty funny. So these plates worked in episode 3 and, while I know they shot some of it practical, obviously plates were needed for other parts. Watching the show, since I knew plates were being used in the scene, I kept a close eye on stray hair strands, as that's usually the biggest way to notice VFX backgrounds. Whatever they did, they did nice work. There were a few instances where I think I can tell it's VFX backgrounds, but overall they did a really good job compositing everything together.

We shot plates for another scene as well, but I haven't seen them appear in the show yet. I'll keep an eye out for them and share once they're up. In the meantime, if you haven't see the series, I recommend it.

The Man From Death

Here's a strange little shoot that I worked on quite a while ago, as it had a long post-production process. I started out as a camera assistant on the shoot, but much later, well after principal photography had wrapped, I came back to DP the FX unit (my credit is 3rd Unit DP). I handled the ECU exploding eyeballs, slow-motion bullet coming out of the barrel of a gun, and the bullet hitting the match. As with the main shoot, which utilized the RED Epic Dragon, I also shot the FX sequence on that camera as well.

When we shot this, I had no idea just how weird the final product would be. It's interesting to see how it came together in the edit. We may have sweated it out in the hot sun to get it made, but we had fun doing it.

The Man From Death from Stream Team on Vimeo.